LQ-Metal blanket for sheet fed printing&metal graphics

LQ Metal blanket is appropriate to good quality sheet fed printing&metal graphics. Excellent dimensional stability; improved smash and edge marking resistance; the optimum thickness of ink layer provides excellent dot reproduction. Minimal dot gain, appropriate to small dot printing.

Products Details

Construction Plies fabrics
Type Microsphere
Surface Micro-ground
Roughness 0.90– 1,00 μm
Hardness 76 - 79 shore A
Elongation ≤ 0.9 % at 500 N/5cm
Compressibility 13-16
Colour Blue
Thickness 1.97mm
Thickness tolerance +/- 0,02mm
3.The rubber blanket surface should be acid and oil resistant to prevent its surface layer from being damaged. The rubber blanket is often in contact with oil, which will cause its aging and finally loosen its internal organization. The blanket is often in contact with acidic substances, which will cause its surface corrosion. Wash with fast volatile detergent, such as gasoline, instead of kerosene and other slow volatile substances. 4. The rubber blanket surface shall be kept clean. The effective part of printing needs to be kept clean frequently.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours